TL;DR — Drylining cost in Solihull 2026: Standard drylining runs £28–£50 per m² for walls. Suspended ceilings run £30–£52 per m². Commercial rates drop to £25–£45 per m². Metal stud partition walls run £55–£135 per linear metre. These figures include labour, materials, and standard finish. Fire-rated, acoustic, and insulated systems are priced separately. For a precise figure for your property, we offer free written quotes with same-day response.
Solihull Drylining Cost by Service (2026)
Below is a comprehensive pricing table for the most common drylining services in the Solihull Metropolitan Borough. All figures are 2026 prices for residential properties in the B91, B90, B92, B93, B94, B36–B40 postcode range and the wider West Midlands.
| Service | Unit | Solihull Price | Includes |
|---|---|---|---|
| Standard plasterboard wall (Level 3) | per m² | £28–£38 | 12.5mm board, tape and joint, ready for wallpaper/textured finish |
| Standard plasterboard wall (Level 4 skimmed) | per m² | £38–£50 | Skim finish, ready for flat emulsion |
| Suspended ceiling (Grid + tile) | per m² | £30–£45 | 600x600mm grid, lay-in tiles, light fittings |
| Suspended ceiling (Plasterboard) | per m² | £38–£52 | MF ceiling, 12.5mm board, skimmed finish |
| Metal stud partition (single layer, both sides) | per linear m | £55–£100 | 50–70mm stud, two boards, insulation optional |
| Metal stud partition (double layer, acoustic) | per linear m | £78–£135 | 70–100mm stud, two layers each side, mineral wool |
| Dot and dab (dry lining) plasterboard | per m² | £22–£38 | Adhesive dabs directly to masonry |
| Taping & jointing (labour-only) | per m² | £8–£12 | Tape, joint, sand — labour only |
| Insulated plasterboard (PIR-backed) | per m² | £45–£62 | 25–50mm PIR + 12.5mm plasterboard |
| Fire-rated plasterboard upgrade | per m² | +£6–£12 | 15mm FireLine or similar upgrade |
| Acoustic plasterboard upgrade (SoundBloc) | per m² | +£9–£15 | High-density acoustic board |
| Refurbishment / strip-out | per room | £280–£650 | Remove old plaster, dispose, re-board |
What Affects the Price in Solihull
Five main factors move drylining prices up or down in the Solihull borough. Knowing these helps you get a fair quote.
Property type
New builds are faster and cheaper per m² than renovations. Older Streetsbrook, Olton and Shirley semis may need prep work, damp treatment, or breathable plasterboard compatibility before drylining can begin.
Access difficulty
Tight staircases, no lift access, high ceilings over 2.4m, or restricted parking in Solihull town centre all add labour time. A top-floor flat with no lift can push labour up by £200–£400.
Insulation requirements
PIR-backed insulated plasterboard, cavity fill, or mineral wool between studs adds material cost but improves thermal performance and EPC ratings. Essential for older Streetsbrook semis with solid walls.
Ceiling height
Standard 2.4m ceilings are baseline. Anything above 3.0m requires longer boards, taller ladders or scaffold towers, and more time per m². Vaulted ceilings and stairwell walls carry a premium.
Waste removal
Stripping old plaster or removing existing boards requires skip hire (£250–£450 in Solihull) or disposal fees. Always confirm if included in your quote.
Hidden Costs to Watch For
Most reputable Solihull quotes are honest about what they include — but watch for these add-ons:
- Access equipment: Scaffolding, tower platforms, or cherry pickers for high ceilings can add £600–£3,000 in Solihull town centre. Always ask if included.
- Skip hire: Disposal fees can be £250–£450 per skip. Reputable contractors include this in writing.
- Asbestos testing: Pre-1980s properties may need an asbestos check before stripping. Costs £80–£200 for sampling.
- Electrical re-routing: Moving sockets, light switches, or other services through new partitions adds £40–£80 per point.
- Plumbing re-routing: Moving radiators or pipework adds £80–£150 per point.
- Decoration after: Tape and joint is not paint-ready. Allow another £8–£12 per m² for priming and painting.
- VAT: Most small contractors are not VAT registered. Larger firms add 20%. Always confirm.
How to Compare Solihull Drylining Quotes
Three written quotes is the rule of thumb for any Solihull drylining project. Here's how to compare them honestly:
- Same scope, same finish. Tell every contractor the same job spec — board type, finish level, insulation, ceiling heights, doors, glazing.
- Itemise labour and materials. A quote that bundles labour and materials as one line is harder to compare. Look for hourly day rates and material costs separately.
- Check the finish level. Level 3 vs Level 4 vs Level 5 changes the price by £5–£9 per m². Make sure each quote is for the same level.
- Confirm access, waste, and decoration. A quote that says "everything included" usually means nothing included. Ask for the breakdowns.
- Look for guarantees and insurance. A 12-month workmanship guarantee and £1m public liability are the minimum.
- Check reviews and examples. Google reviews, Tradexion, Checkatrade, and a portfolio of recent Solihull work.
Solihull vs National Average Pricing
Solihull is a thriving West Midlands town of around 130,000, with surrounding borough areas including Shirley, Knowle, Dorridge, Olton, Chelmsley Wood, Marston Green, Bickenhill, Hockley Heath, the Meriden ward, Kingshurst, and Castle Bromwich. For building trades, the West Midlands typically runs above the UK average:
- Solihull dryliner day rate: £200–£280 per day
- National average: £180–£250 per day
- London equivalent: £260–£350 per day
- Rural equivalent: £140–£200 per day
Solihull sits roughly 5%–10% above the UK national average, which is close to cities like Birmingham, Coventry and Nottingham. Materials cost roughly the same nationwide, so most of the difference is labour.
Solihull-Specific Property Type Pricing
Three common property types in the Solihull borough come with their own pricing notes:
1930s Streetsbrook Semi
Solid-wall construction throughout. Internal wall insulation (IWI) with insulated plasterboard (PIR) is essential for Part L compliance and EPC uplift. Typical whole-house drylining: £3,500–£7,500 including insulated plasterboard to all external walls, partitions to reconfigure, suspended ceiling to one room.
1960s–70s Chelmsley Wood Estate
Easiform PRC housing. Refurbishment strip-out and re-plaster is the typical ask. Typical whole-property strip-out and re-board: £4,500–£9,000 for a 3-bed.
Commercial Fit-Out (Touchwood / NEC corridor)
Larger scale, often out of hours. Metal stud partitions with double-layer acoustic plasterboard for call centres and offices. Typical commercial rates £25–£45 per m² for bulk runs.
Money-Saving Tips for Solihull Homeowners
- Combine jobs: If you're refitting a kitchen and a bathroom at the same time, group all the partitioning and plastering into a single booking. The crew is on-site already, so marginal cost is low.
- Choose board over skim: Taping and jointing a plasterboard (Level 3) is cheaper than full skim. Most modern emulsions work fine over a good Level 3 finish.
- DIY prep: Stripping wallpaper, removing old plaster, taking out bathroom suites yourself saves £200–£400.
- Schedule out of peak: Winter (Oct–Feb) is quieter for Solihull contractors than summer. Ask for off-peak rates.
- Cash-flow VAT savings: If your project is on a small scale (under ~£10k), a non-VAT-registered sole trader can save 20%. Confirm CIS status and references.
- Skip the middleman: A lead-gen site or referral agency adds 10–25% on top. Going direct to a Solihull-based crew saves that margin.
Frequently Asked Questions
How much does drylining cost per square metre in Solihull?
Standard drylining in Solihull runs £28–£50 per m² for walls and £30–£52 per m² for ceilings, depending on finish level.
Is drylining cheaper than traditional plastering?
Yes, drylining is typically 20–35% cheaper than wet plastering in Solihull because it skips the heavy plastering and drying time.
What is included in a proper Solihull drylining quote?
Plasterboard, framing, insulation, finishing method, labour, waste removal, and any additional work. We itemise every quote.
How do metal stud partitioning costs work in Solihull?
Single-layer partitions run £55–£100 per linear metre. Acoustic or fire-rated upgrades, doors, and glazing are priced separately.
Do I need fire-rated plasterboard?
Yes if you have an integral garage, between house and loft, in HMOs, or in commercial buildings. Part B specifies where.
How long does a typical drylining project take?
A single room takes 1–2 days. A small flat 4–5 days. A 3-bed Streetsbrook semi 1–2 weeks.
What finish level should I choose?
Level 3 for wallpaper/textured. Level 4 for flat emulsion. Level 5 for gloss or critical lighting. Each level adds £5–£9 per m².
Should I pay a deposit?
Reputable Solihull contractors ask for 10–25%. Avoid anyone demanding 50% upfront. Final balance on completion.
How do Solihull costs compare to the national average?
Solihull sits 5%–10% above the UK national average. West Midlands is above rural areas but below London.
What insurance should a contractor have?
£1m public liability minimum, employer's liability, and ideally professional indemnity. CSCS cards for every operative.
Can drylining improve my property's energy efficiency?
Yes. PIR-backed insulated plasterboard lifts wall U-values and helps meet Part L. Older Streetsbrook semis benefit most.
What's the difference between dot and dab and metal stud?
Dot and dab sticks plasterboard straight to masonry with adhesive. Metal stud creates a framed cavity for services.
Do I need building regulations approval?
Not for simple drylining. Loft conversions, extensions, garage conversions, and thermal upgrades may need SMBC sign-off.
What plasterboard brands do you use?
British Gypsum, Knauf, Celotex, Kingspan, Rockwool — all BS EN 520 certified for the relevant application.
Get Your Free Solihull Drylining Quote
Free site visit within 24–48 hours, same-day written quote, no obligation. We cover all 12 areas of the Solihull borough and the wider West Midlands.
Related Solihull Drylining Services
For more detail on any of the services priced above, visit our dedicated pages: Drylining Contractors · Partition Walls · Suspended Ceilings · Metal Stud Partitioning · Commercial Drylining · Office Drylining · Plasterboard Installation · Taping & Jointing · Fire-Rated Drylining · Acoustic Drylining · Insulated Drylining · Refurbishment Drylining.